Maximum Grades By Making ready With C1000-132 Dumps UPDATED 2023
Prepare C1000-132 Exam Questions [2023] Recently Updated Questions
NEW QUESTION # 38
In the Receiving application, what are the three statuses that show the overall receipt status of the purchase order?
- A. COMPLETE
- B. VOID
- C. RETURNED
- D. WINSP
- E. NONE
- F. PARTIAL
Answer: A,E,F
Explanation:
In the Receiving application in IBM Maximo Manage, the three statuses that show the overall receipt status of the purchase order are COMPLETE, PARTIAL and NONE.
NEW QUESTION # 39
What is a licensing method used to obtain the Maximo Asset Suite?
- A. User credits license
- B. Feature based license
- C. Monthly license
- D. Cloud based license
Answer: D
Explanation:
One licensing method used to obtain the Maximo Asset Suite is a Cloud based license.
NEW QUESTION # 40
How is the Lock Out / Tag Outs application structured?
- A. Define the isolation procedures on a set of related assets and specify a sequence.
- B. Specify a Lock Out on the Location or Asset and define the Tag Out Operations.
- C. Specify a Lock Out on an Asset with a Locking Device and define the Tag Out Operations.
- D. Specify a Tag Out on the Location or Asset and define the Lock Out Operations.
Answer: B
Explanation:
In IBM Maximo Manage v8.0 implementation, the Lock Out / Tag Out application is structured such that you specify a Lock Out on the Location or Asset and define the Tag Out operations. This application is used to manage the procedures and controls put in place to protect personnel from injury due to unintended or inadvertent equipment or system operation.
NEW QUESTION # 41
In the Work Order Tracking application, a Work Order is generated from a Preventive Maintenance (PM) record. How is the target finish date calculated?
- A. the Job Plan finish date
- B. the PM target finish date
- C. the Job Plan start date + the Job Plan duration
- D. the Work Order target start date + the Job Plan duration
Answer: D
Explanation:
In the Work Order Tracking application, when a Work Order is generated from a Preventive Maintenance (PM) record, the target finish date is calculated as the Work Order target start date + the Job Plan duration.
NEW QUESTION # 42
When creating a new Inspection form, a client requires a Work Order to be created if certain responses are recorded. Which two actions are required for this to be achieved?
- A. In Form Settings add an Action Script.
- B. Choose Work Order on question action.
- C. Make the question response interactive.
- D. Create an escalation on the QRESPONSE Object.
- E. In the Question Options, set the Require action flag.
Answer: B,E
Explanation:
According to the IBM documentation, you can create inspection forms that detail the questions and types of responses that you want to collect. The inspection forms that you create are then available to inspectors in the Conduct an Inspection tool. You can also add conditions to the response fields of existing questions on inspection forms to gather more information. You can determine which additional response fields appear to inspectors, depending on the answers they gave to inspection form questions.
To create a work order based on certain responses, you need to do two things:
Choose Work Order on question action: This option allows you to specify an action that is triggered when a certain response is selected by the inspector. For example, if a question asks "Is there any damage?", and the inspector selects "Yes", you can choose Work Order as the action that is triggered by this response. This will create a work order for repairing the damage.
In the Question Options, set the Require action flag: This option allows you to indicate that an action is required for a question. For example, if a question asks "Is there any damage?", and you set the Require action flag to Yes, then the inspector must select a response that triggers an action, such as Work Order or Notification. If they select a response that does not trigger an action, such as "No" or "N/A", they will see an error message and will not be able to submit the inspection form.
NEW QUESTION # 43
How can a Master Preventive Maintenance record be associated with multiple non-rotating assets?
- A. Use the Move/Modify Assets action.
- B. Use the Apply Down Hierarchy action on the Master Preventive Maintenance record.
- C. Use an Asset Template.
- D. Add the Assets to the Multiple Assets table on the Master Preventive Maintenance record.
Answer: D
Explanation:
To associate a Master Preventive Maintenance record with multiple non-rotating assets, we can add the assets to the Multiple Assets table on the Master Preventive Maintenance record. This allows us to associate the preventive maintenance schedule with multiple assets, ensuring that the maintenance activities are performed on each of the associated assets as scheduled.
NEW QUESTION # 44
How many failure reports can be created for the same Work Order?
- A. unlimited failure reports for each work order, but none for a task
- B. one failure report for the work order and only one for each task of the work order
- C. just one failure report
- D. unlimited failure reports for either a work order or any of its tasks
Answer: B
Explanation:
In IBM Maximo Manage, you can create one failure report for a Work Order and only one for each task of the Work Order.
NEW QUESTION # 45
At which data storage level are locations, assets and storerooms defined?
- A. Site
- B. Organization
- C. Set
- D. System
Answer: A
Explanation:
Locations, assets and storerooms are defined at the Site level in IBM Maximo Manage.
NEW QUESTION # 46
In the Purchase Requisitions application and with default settings, what status does the Purchase Requisition change to when all of its lines have been copied to a Purchase Order or a Contract?
- A. INPRG
- B. COMPLETE
- C. APPR
- D. CLOSE
Answer: B
Explanation:
In the Purchase Requisitions application with default settings in IBM Maximo Manage, when all lines of a Purchase Requisition have been copied to a Purchase Order or a Contract, the status of the Purchase Requisition changes to COMPLETE.
NEW QUESTION # 47
Where in Maximo can the Server IP Addresses and Logged in users be observed?
- A. Server Management Consol
- B. Maximo Management Interface Work Center
- C. Administration Work Center
- D. Database Configuration application
Answer: B
Explanation:
In Maximo Manage, the Server IP Addresses and Logged in users can be observed in the Maximo Management Interface Work Center.
NEW QUESTION # 48
What are three available associations in the Hazards application?
- A. Hazardous Materials
- B. Lock Outs
- C. Safety Plans
- D. Precautions
- E. Tag Outs
- F. Material Safety Data Sheets (MSDS)
Answer: A,D,F
Explanation:
The Hazards application in IBM Maximo Manage v8.0 allows users to associate Material Safety Data Sheets (MSDS), Hazardous Materials, and Precautions with a particular hazard. These associations help in managing safety information related to hazards and in ensuring compliance with safety regulations.
NEW QUESTION # 49
Which two records can be included as a contract line item on a Lease/Rental Contract?
- A. Asset
- B. Rotating item
- C. Non-Rotating item
- D. Tool
- E. Non-Rotating Asset
Answer: A,B
Explanation:
In IBM Maximo Manage, two records that can be included as a contract line item on a Lease/Rental Contract are a Rotating item and an Asset.
NEW QUESTION # 50
What are the three default values used with the position of a Crew Type or Crew?
- A. Helper
- B. Leader
- C. Apprentice
- D. Technician
- E. Supervisor
- F. Driver
Answer: A,B,C
Explanation:
In IBM Maximo Manage v8.0 implementation, the three default values used with the position of a Crew Type or Crew are Helper, Leader, and Apprentice. These values represent the different roles that members of a crew can assume.
NEW QUESTION # 51
Which Maximo application can be used to generate replacement plans for assets?
- A. Maximo Manage
- B. Maximo Health
- C. Maximo Health, Safety and Environmental (HSE)
- D. Maximo Predict
Answer: B
Explanation:
The Maximo Health application can be used to generate replacement plans for assets.
NEW QUESTION # 52
When using flow control on a Work Order, how ca from the Parent to Child Work Orders?
user ensure that Work Order status changes are inherited
- A. Check the Roll Down Status Changes flag on the Parent and Child Work Order.
- B. Check the Inherit Status Changes flag on the Work Order and ensure the mxe.app.wo.flowControlStatuslnheritance System Properties is set to 1.
- C. Ensure the Asset or Location
on both the Parent and Child Work Order. - D. In the Organization application, check the Intarit Status Changes flag in Work Order Options -> Flow Control Options.
Answer: D
Explanation:
When using flow control on a Work Order in IBM Maximo Manage, to ensure that Work Order status changes are inherited from the Parent to Child Work Orders, you should go to the Organization application and check the Inherit Status Changes flag in Work Order Options -> Flow Control Options.
NEW QUESTION # 53
Which application in the IBM Maximo Application Suite can be used to perform criticality scoring?
- A. Maximo Manage
- B. Maximo Health
- C. Maximo Supervision
- D. Maximo Prevent
Answer: B
Explanation:
The Maximo Health application in the IBM Maximo Application Suite can be used to perform criticality scoring.
NEW QUESTION # 54
In which application can a Contract property default be set for a specific contract type, for example Is early termination allowed by the Customer?
- A. Database Configuration
- B. Organizations
- C. System Properties
- D. Contract Administration
Answer: D
Explanation:
The Contract Administration application is used to set contract property defaults for specific contract types. For example, you can set whether early termination is allowed by the customer for a specific contract type.
NEW QUESTION # 55
Which two automation script launch points can be triggered directly by a workflow?
- A. Object
- B. Attribute - '
- C. Integration
- D. Action
- E. Custom Condition
Answer: D,E
Explanation:
two automation script launch points that can be triggered directly by a workflow are B. Custom Condition and D. Action. An action launch point associates a script with an action and executes when the specified action occurs1. A custom condition launch point associates a script with a condition and executes when the specified condition is evaluated2.
NEW QUESTION # 56
Which statement is true regarding Master Preventative Maintenance (PM) records?
- A. Associated PM records can be created for a Master PM which does not have an item
- B. Associated PM records are temporary and expire after 90 days.
- C. Associated PM records can only be created for a rotating item's location.
- D. Associated PM records can only be created for a rotating item's asset.
Answer: A
Explanation:
Regarding Master Preventative Maintenance (PM) records in IBM Maximo Manage, associated PM records can be created for a Master PM which does not have an item.
NEW QUESTION # 57
......
Give push to your success with C1000-132 exam questions: https://skillsoft.braindumpquiz.com/C1000-132-exam-material.html